Hi all,
I’m really having a hard time to get any GPU properly working on my ASRockRack board using Fedora 40.
@bexcran, @Civiloid , @shadethegrey , you have had more success. Any idea?
What really stomps me is the “no signal” part. I have used three different cables, mini-DP to mini-DP, mini-DP to DP and mini-DP to HDMI.
I was really reluctant to get an NVidia T1000, because I want to use manufacturer supported open source drivers, but even that did not work.
| card | architecture | driver | kernel | pcie patches applied | pre-boot graphics using GOP | result |
|---|---|---|---|---|---|---|
| NVidia GF 610 | Curie | nouveau | 6.9.4-200.fc40 | no | no | driver does not load, firmware missing |
| AMD Radeon WX3200 Pro | Polaris | amdgpu | 6.9.4-200.fc40 | no | manual from UEFI shell only | garbled screen, kernel errors |
| AMD Radeon WX3200 Pro | Polaris | amdgpu | 6.9.0 vanilla | yes | manual from UEFI shell only | works, but really sluggish, kernel errors |
| Sapphire Pulse Radeon RX 6400 | Navi 2 | amdgpu | 6.9.4-200.fc40 | no | yes, starting in grub | driver crashes |
| Sapphire Pulse Radeon RX 6400 | Navi 2 | amdgpu | 6.9.0 vanilla | yes | yes, starting in grub | driver crashes |
| Sparkle Intel Arc A310 Eco | DG2 | xe | 6.9.0 vanilla | yes | no | driver loads OK but no signal on monitor |
| Sparkle Intel Arc A310 Eco | DG2 | xe from intel drm-next | 6.10.0.-rc3 | yes | no | driver loads OK but no signal on monitor |
| NVidia T1000 | Turing | nouveau | 6.9.5-200.fc40 | no | no | driver loads OK but no signal on monitor |
| NVidia T1000 | Turing | nvidia from rpmfusion | 6.9.5-200.fc40 | no | no | akmod fails to build driver |