Asrock AMPONE8D-2T/BCM Bundle fails with 8D

General Discussion
1

Works with 4 (Swapped other 4), 2, and 1 (in A1 or E1)

Never seen SOL output

Standoffs removed? DIMMs warm to touch.

Purchased March 30!

IMG_0766
IMG_07661980×3520 951 KB

IMG_0750
IMG_07504284×5712 4.87 MB

IMG_0757
IMG_07573024×4032 1.31 MB

2

When you say you’ve never seen the SOL output, do you mean even when it’s working?

If so, you can access the SOL via ipmitool:

ipmitool -I lanplus -U admin -P admin -H <bmc_ip_address> sol activate instance=1
ipmitool -I lanplus -U admin -P admin -H <bmc_ip_address> sol activate instance=2
ipmitool -I lanplus -U admin -P admin -H <bmc_ip_address> sol activate instance=3

I don’t think there are 3 SOL instances, but I can never remember which consoles are on which instance, and I think this board does have more than 1.

1 Like
3

Redid the Ampere One seating and now starting with just A1 failed, which was my last test before the seating.